Water Treatment & Accessories

NAOH Caustic Soda (pH Regulator)NPT-NAOH

Flake sodium hydroxide for mud pH adjustment and bentonite alkaline pre-treatment — raising yield and improving polymer dissolution.

Product Overview

One-liner: The pH essential for every mud system, Flake sodium hydroxide for mud pH adjustment and bentonite alkaline pre-treatment — raising yield and improving polymer dissolution.

NAOH regulates mud-system pH: alkaline pre-treatment of bentonite raises swelling and yield; polymer slurries keep the alkalinity that supports dissolution and viscosifying; and waste-slurry neutralisation brings effluent pH within reuse or discharge limits.

Fast pH control

Dissolves quickly for rapid pH response.

Higher yield

Alkaline pre-treatment swells bentonite more fully for higher yield.

Multiple pack sizes

25 kg bags or jumbo bags to match on-site consumption.


Applicable Strata / Scenarios

Strata typeTypical scenarioRecommended ratioExpected effect
Bentonite pre-treatmentAlkali activation0.2%–0.5% of clayMore swelling, higher yield
Polymer slurrypH adjustmentTo pH targetSupports dissolving and thickening
Waste slurryNeutralisationTo discharge specpH 6–9 in spec
Hard waterWater softeningBy water qualityReduces Ca/Mg effects
!Assess product suitability for the strata and working conditions through on-site trial mixes; ratios on this page are indicative and should be adjusted using trial results and engineer advice.

Technical Data Sheet

Quantified core indices for product selection and tender comparison; a test report ships with every batch.

Test itemSpecificationTest method
AppearanceWhite flakesVisual
NaOH content≥ 99.0%Titration
Sodium carbonate≤ 0.5%Titration
Chloride≤ 0.03%Titration
Iron≤ 0.005%Spectrophotometry
Packaging25 kg woven bag (plastic-lined)—

How to Use / Mix Design

StepKey pointsReference dosage
ProtectWear goggles and alkali-resistant gloves; avoid skin contact—
AddDissolve first, then dose — never add dry flakes directlyMeter to pH target
MonitorTrack with a pH meter; adjust in small stepsContinuously
StoreKeep sealed and dry, away from acids—
iMix design varies with strata, borehole diameter and working conditions. Perform trial mixes before use and determine dosage from the results; include the strata report, borehole diameter and construction requirements when seeking advice.

Related Solutions


Related Cases

◇
No public case studies for this product yet; contact us for comparable project experience.

GET A QUOTE

Tell us your strata conditions —
get tailored selection advice

Share your strata, borehole diameter and schedule; engineers will reply with mix advice, quantity estimates and lead time. Your information is used only for this enquiry.

✓On-site strata compatibility assessment (per project arrangement)
✓Batch test report & certificate with every shipment
✓On-site mix commissioning by our engineers (per project arrangement)
✓Samples and product brochures on request
Sales hotline
Business email
Form mode
For a quick conversation, leave your name, phone and a short message. Choose detailed project requirements if you have strata, borehole diameter or schedule data.
Filled in from the entry point you used; you can change it
Additional strata (multiple choices)
We will contact you to discuss your requirements.