PAM-POOL Mud-Pond PurifierNPT-PAM-POOL
A flocculating clarifier for mud-pond purification — it flocculates cuttings quickly, shortens cleaning cycles and lets the clear water be reused for slurry make-up.
Product Overview
One-liner: Fast settling for mud ponds, A flocculating clarifier for mud-pond purification — it flocculates cuttings quickly, shortens cleaning cycles and lets the clear water be reused for slurry make-up.
PAM-POOL is built for circulating mud-pond purification. Dosed into the pond it bridges cutting particles into fast-settling flocs, improving clarification, cutting cleaning frequency and fresh-water top-up, with the clear layer reused directly for slurry make-up.
Fast settling
Flocs form within 30 minutes of dosing, cuttings settle quickly.
Water reuse
The clear layer is low in turbidity and can be reused for slurry or dust control.
Less pond cleaning
Shorter clarification cycles mean noticeably fewer clean-outs.
Applicable Strata / Scenarios
| Strata type | Typical scenario | Recommended ratio | Expected effect |
|---|---|---|---|
| Shield mud pond | Circulating slurry cleanup | 50–100 g/m³ | Fast cutting settling |
| Pile mud pond | Cleaning & dewatering | 80–150 g/m³ | Solid-liquid split, water reuse |
| Pipe-jacking pond | Tail slurry treatment | 100–200 g/m³ | Fewer clean-outs |
| Water circuit | Reuse water treatment | 30–80 g/m³ | Lower turbidity |
Technical Data Sheet
Quantified core indices for product selection and tender comparison; a test report ships with every batch.
| Test item | Specification | Test method |
|---|---|---|
| Appearance | White powder | Visual |
| Solids content | ≥ 90.0% | GB/T 8077 |
| Molecular weight | 8–12 million | Viscometry |
| Hydrolysis degree | 20%–30% | Titration |
| Dissolution time | ≤ 60 min | Stirring observation |
| Shelf life | 24 months | Storage observation |
How to Use / Mix Design
| Step | Key points | Reference dosage |
|---|---|---|
| Stock solution | Sprinkle slowly into stirred water to make a 0.1%–0.2% solution | 0.1%–0.2% |
| Dose | Meter continuously ahead of the pump by slurry volume | 50–150 g/m³ |
| Mix | Stir or mix in-line for 10–20 minutes | — |
| Recover | Draw off the clarified water layer for reuse | As clarification allows |
Related Solutions
05Rotary Drilling Rig Support Package
A slurry parameter package matched to rig model and bucket conditions — 22% faster hole completion per pile.
06Waste-Slurry Environmental Treatment Plan
A complete flow from mud-pond purification to solid-liquid separation, returning clear water to use and leaving a dry cake.
Related Cases
Tell us your strata conditions —
get tailored selection advice
Share your strata, borehole diameter and schedule; engineers will reply with mix advice, quantity estimates and lead time. Your information is used only for this enquiry.